Basic Coatings Street Shoe 275 - is the lowest VOC hardwood floor finish offered by Basic Coatings. Streetshoe 275 is based on the formula of the legendary StreetShoe XL.  It is just as durable and its  meets all US regulations for VOC compliance.  Comes complete with catalyst.

Basic StreetShoe 275 floor finish has several key benefits:
- Same toughness as the original Basic Coatings Street Shoe
- Easy to apply. Streetshoe 275 can even be applied with a roller.
- Self leveling delivers a smoother floor finish.
- Streetshoe 275 resists tannin pull in tough-to-finish species like white oak.



 

Coverage : 500 - 700 Square Feet per Gal.

Color in Container:Milky white (dries clear)

Solids Content:31%

Chemical Resistance: Excellent

Flash Point: Greater than 200º F

VOC: Maximum VOC does not exceed 250 grams/liter, excluding water

Luster @ 60° on wood: Gloss: >80 units, Semi-Gloss: 45-55 units, Satin: 25-30 units, Super Matte: 10-15 units

Pot Life: Once catalyzed: 24 hours

Dry Time: Minimum 2-3 hours between coats and 1 hour of good ventilation before closing job site. Use of fans and moisture meter is recommended. 

Clean Up: Water

Storage: Do not store above 120°F (49C) 

Directions for Use

• 275 VOC: LEED compliant.
• No waste; can be recatalyzed.
• Fastest cure available; 90% cured in 24 hours.
• Easy to apply.
• UV Inhibitor minimizes sunlight-related color changes.
• Four sheens (Super Matte, Satin, Semi-Gloss, Gloss).
• Ultimate in durability.

MSDS Sheet

Basic Coatings Street Shoe 275 - is the lowest VOC hardwood floor finish offered by Basic Coatings. Streetshoe 275 is based on the formula of the legendary StreetShoe XL.  It is just as durable and its  meets all US regulations for VOC compliance.  Comes complete with catalyst.

Basic StreetShoe 275 floor finish has several key benefits:
- Same toughness as the original Basic Coatings Street Shoe
- Easy to apply. Streetshoe 275 can even be applied with a roller.
- Self leveling delivers a smoother floor finish.
- Streetshoe 275 resists tannin pull in tough-to-finish species like white oak.

Coverage : 500 - 700 Square Feet per Gal.

Color in Container:Milky white (dries clear)

Solids Content:31%

Chemical Resistance: Excellent

Flash Point: Greater than 200º F

VOC: Maximum VOC does not exceed 250 grams/liter, excluding water

Luster @ 60° on wood: Gloss: >80 units, Semi-Gloss: 45-55 units, Satin: 25-30 units, Super Matte: 10-15 units

Pot Life: Once catalyzed: 24 hours

Dry Time: Minimum 2-3 hours between coats and 1 hour of good ventilation before closing job site. Use of fans and moisture meter is recommended. 

Clean Up: Water

Storage: Do not store above 120°F (49C) 

Directions for Use

• 275 VOC: LEED compliant.
• No waste; can be recatalyzed.
• Fastest cure available; 90% cured in 24 hours.
• Easy to apply.
• UV Inhibitor minimizes sunlight-related color changes.
• Four sheens (Super Matte, Satin, Semi-Gloss, Gloss).
• Ultimate in durability.

MSDS Sheet

Basic Coatings StreetShoe Catalyst Replacement for 5-gallon pail.  Basic Coatings Streetshoe can be recatalyzed a second time so this replacement catalyst saves money.

Basic Coating's Dry Time Extender is an excellent additive that slows the dry time of Basic's water based floor finishes. While not needed in all situations, it can be extremely beneficial when the temperature , humidity or airflow are not favorable.

Add up to 12 ounces of Basic Dry Time Extender to any Basic Coatings water based floor finish such as Streetshoe and Emulsion.  Slowly stir the Dry Time Extender into the floor finish.  Dry Time Extender increases flow and level time

Reduces streaking and/or leveling issues.  TIP : Do not add more than 12 ounces of Dry Time Extender per gallon of floor finish..

Dry Time Extender Color .............. Clear

Material Clean Up ....... Water

Basic's Extender - Increases floor finish flow and leveling time

Reduces streaking or leveling issues

Dry Time Extender can be added to all Basic Coatings water based finishes