Bostik's Best Wood Flooring Urethane Adhesive 10.1 FL OZ Caulk Tube

BOSTIK’S BEST is a one-part, trowel applied, tacking, moisture-cure urethane adhesive; this advanced scientifically formulated adhesive does NOT contain any water. Once cured, Bostik’s Best is waterproof and is not adversely affected by exposure to moisture or water; its superior properties provide a tough, flexible, tenacious bond to a variety of surfaces. Bostik’sBest elastomeric characteristics allow the adhesive to move with the wood as it expands and contracts over the life of the floor. BOSTIK’S BEST may be used to adhere all engineered, acrylic impregnated, solid plank-flat milled, shorts, bamboo, cork, and parquet hardwood flooring designed and recommended in writing by the hardwood flooring manufacturer for glue-down applications. This adhesive can also be used to install plywood as described, as well as, ceramic tile, marble, and stone inlays for light commercial and/or residential applications. BOSTIK’S BEST may be used over all properly prepared substrates common to hardwood flooring installations including: concrete, plywood, particle or chip board(underlayment grade), well bonded vinyl and ceramic tile, cement backer board, gypsum patch/underlayments (dry, above-grade), cement patch/underlayments, radiant-heat flooring, and terrazzo.This product contains Bostik's BLOCKADE™ antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried adhesive; the dried adhesive resists stains caused by mold.

Bostik's Best Caulk Tubes are avilable in 10.1 FL OZ tubes and 28 FL OZ tube

• Features & Benefits
• Recommended by Most Hardwood Manufacturers
• Contains No Water...will not cause cupping or end-lifting
• Freeze/Thaw Stable
• Low Odor
• V.O.C. Compliant
• For Use in Above, On and Below Grade Installations
• Can be used to install all types of wood flooring including solids, as well as ceramic tile, marble and stone inlays for light commercial and residential applications
• Offers Vapor-Retarding Characteristics to Wood Flooring Installations
• Tenacious Bond
• Remains Elastomeric; Moves with Expanding/Contracting Wood
• Set with Wet-Lay or Walk-On-Work Method of Installation
• Tacky Consistency Holds Down Flooring with Normal Bow and Bridges Minor Subfloor Variations
• Waterproof Adhesive
• High Solids Content Results in Greater Adhesive Coverage
• May be Shipped via Air Freight
• Contains No Chlorinated Solvents

Recommended Coverage

	1/8" x 1/8" Square Notch Finger Block Parquet Coverage: 80 sq. ft. per Gallon
	3/16" x 5/32" V Notch 3 ply and 5 ply Engineered Coverage: 50 sq. ft. per Gallon
	1/4" x 1/8" Square Notch 1/2" Engineered & 3/4" Parquet Coverage: 40 sq. ft. per Gallon
	1/4" x 1/4" Square Notch Flat Milled Solid & Shorts or Plywood Coverage: 35 sq. ft. per Gallon