A superior quality, high gloss polyurethane finish designed specifically for gymnasium floors. The DURA SEAL ™ GYMTHANE™ Sealer and Finish System resists rubber marks and scuffing and is easily maintained.
Gymthane - Material Safety Data Sheet
PHYSICAL PROPERTIES:
|
NON-VOLATILE CONTENT |
45% |
|
VOLATILE CONTENT (RULE 66) |
55% |
|
RESISTANCE TO SKINNING |
No Skinning |
|
COLOR |
No. 11 Gardner |
|
DRY FILM COLOR |
No Darkening |
|
PACKAGE STABILITY |
No Sediment, No Darkening |
|
FLASH POINT |
103°F |
|
DRY TIME |
Dry to touch less than 3 Hours |
|
Dry Hard |
7 Hours |
|
No Tack |
After 24 Hours |
|
ABRASION RESISTANCE |
Sand |
|
SWARD HARDNESS |
52 |
|
COEFFICENT |
125 |
|
FLEXIBILITY |
Passes 1/8" Mandrell Bend |
|
TENSILE STRENGTH |
100 psi |
Preparation:
1. Properly prepare surface according to NOFMA OR NWFA approved methods. Screen using No.100 disc for final cut.
2. Remove all dust with a broom and/or vacuum and tack surface with a clean cloth moistened with mineral spirits.
Sealer Application:
1. Apply one coat of GYMTHANE Sealer with a lambswool applicator at a coverage rate of 500 square feet per gallon.
2. Allow to dry at least 8 hours.
3. Screen using No.100 disc.
4. Tack with a clean cloth moistened with mineral spirits to remove all dust.
Game Line Application:
1. Apply Fuller O~Brien® Versaflex (Oil Based) or Fuller O'Brien® Ultra Color (Oil Based) accordingly to label directions.
2. Allow to dry thoroughly.
3. Screen surface with a No.120 screen or finer.
4. Tack surface with a cloth dampened with mineral spirits to remove all dust.
Finish Application:
1. Apply first coat of GYMTHANE Finish with a lam bswool applicator at a coverage rate of 500 square feet per gallon.
2. Allow to dry at least 8 hours.
3. Screen with No.100 disc screen.
4. Tack with a clean cloth moistened with mineral spirits to remove all dust.
5. Apply a second coat of GYMTHANE Finish in the same manner as the first.
