18" T-Bar Floor Finish Applicator Sleeves are used to apply water based hardwood floor finishes.  These specially flocked foam sleeves are perfect for the "snowplow" application of water-based finishes. 

These floor finish applicator sleeves are universal in that they will fit any of our 18 inch t-bar applicators such as the Duratool 18 inch applicator and the Bona 18 inch applicator head.

Recommended Process: Use one sleeve for waterbased sealers and then use a different sleeve for the water based floor finishes.

Clean Up : When asking "How many should I buy?" think of these sleeves in the same way you would think of a paint roller cover...If cleaning time and water conservation are your top priorities then one sleeve per coat might be the answer. If cost and conservation of applicator materials is your priority these sleeves can be cleaned with thorough water rinsing or preserving in a moist air-tight container between coats.

DURATOOL 24" T-bar applicator sleeve refills have a patented angled-end design that allows you to trim right up to the baseboard! You can now cut in areas along walls, doorways, and other places previously requiring other tools and more time. (Click on the picture at left to see a larger image.)

DURATOOL Applicators are manufactured to the highest quality standards. Each refill is carefully inspected prior to packaging to ensure premium performance.

Comes out of the bag clean - no fiber shedding.

DURATOOL 18" T-bar applicator sleeve refills have a patented angled-end design that allows you to trim right up to the baseboard! You can now cut in areas along walls, doorways, and other places previously requiring other tools and more time. (Click on the picture at left to see a larger image.)

DURATOOL Applicators are manufactured to the highest quality standards. Each refill is carefully inspected prior to packaging to ensure premium performance.

Comes out of the bag clean - no fiber shedding.

Great new idea - saves time with better results!

DURATOOL 12" T-bar applicator sleeve refills have a patented angled-end design that allows you to trim right up to the baseboard! You can now cut in areas along walls, doorways, and other places previously requiring other tools and more time. (Click on the picture at left to see a larger image.)

DURATOOL Applicators are manufactured to the highest quality standards. Each refill is carefully inspected prior to packaging to ensure premium performance.

Comes out of the bag clean - no fiber shedding.

This lightweight floor applicator can be attached to a threaded pole for application.

Requires applicators which can be purchased on this page

Pole in picture not included

Our favorite tool for applying water-based finish is the T-bar. This contractor grade applicator "T-bar" is weighted to assure proper film thickness when applying Basic Coatings' sealers and finishes. The head swivels freely to allow for turns. Heavy duty all metal construction provides long-lasting durability.

* Requires "Applicator Sleeves" which can be purchased separately on this page.

Our favorite tool for applying water-based finish is the T-bar. This contractor grade applicator "T-bar" is weighted to assure proper film thickness. The head swivels freely to allow for turns. Heavy duty all metal construction provides long-lasting durability.

* Requires "Applicator Sleeves" which can be purchased separately on this page.

Our favorite tool for applying water-based finish is the T-bar. This contractor grade 18 inch applicator "T-bar" is weighted to assure proper film thickness when applying water-based  sealers and finishes. The head swivels freely to allow for turns. Heavy duty  construction provides long-lasting durability.  This is the right tool for the job.

* Requires "Finish Applicator Sleeves" which can be purchased separately on this page.

* Does not include screw-in handle.  Will fit any standard screw-in handle which you may already have.

Padcoe 24" T-Bar Applicator Sleeves. These flocked foam sleeves are perfect for the "snowplow" application of water-based finishes.

Gym floors and other large jobs may be easier to complete with this 24 inch applicator which increases the square footage you can cover in an hour. (Note: The 18 inch applicator found on this page is usually the desired width for residential jobs.) It's important to use the right tool for the job when working with water-based finish. This Bona Kemi 24 inch floor finish applicator is light weight and will get the job done.

* Does not include screw-in handle.

* Applicator sleeves must be purchased separately on this page.

In Stock - in continental U.S.

 Duratool - Floor Coater - Lightweight - 12"

 Duratool 18" Heavyweight Applicator

12" T-Bar Floor Finish Applicator Sleeves are used to apply water based hardwood floor finishes.  These specially flocked foam sleeves are perfect for the "snowplow" application of water-based finishes. 

These floor finish applicator sleeves are universal in that they will fit any of our 12 inch t-bar applicators such as the Duratool 12 inch applicator and the Bona 12 inch applicator head.